PSD Platform Base Bag-lifting Top Discharge Centrifuge

PSD type centrifuge adopts mechanical assisted discharge, which not only has the characteristics of high efficiency of automatic scraper centrifuge, but also has the advantages of wide applicability of unloading centrifuge, advanced product structure design, small footprint, low failure rate, and high cost performance. Under the action of centrifugal force, the material tends to turn the drum wall, and the liquid phase passes through the source hole of the drum wall through the filter medium covering the drum wall, tends to the inner wall of the shell and falls into the chassis, and is discharged through the outlet. The solid phase material is kept in the drum and can be fully washed to complete the solid-liquid separation. After shutdown, the shell flap is opened, and the special lifting device is used to remove the filter bag to the unloading place. After unloading, the liquid baffle plate and filter bag are loaded into the drum again and the liquid baffle plate is locked, the upper flip cover is closed, and the next working cycle can be started after being locked.

Working Principle:
Once the materials to be separated enter the fast-spinning basket, it will be filtrated by the filter liner under the centrifugal force. The liquid flows out through the liquid outlet, but solids deposit on the internal wall of the basket, Once the solid cake reaches the rate capacity, feeding stops. Wash the solids cake, and then drain out the washing water. Finally stop the machine Use the lifting toolor crane to lift out the filter cloth with solid cake, and move to the discharging place.Open the filter cloth and discharge the solid cake. Put the filter cloth back to the centrifuge and move to next batch.

Working Process Main Technical Parameters